Important Steps in Turf Installation

If you are looking for the best turf installation, you must follow the turf installation guide so that you will not make any mistake and you will get the best turf in no time. Do not let your investment go down the drain because of making a mistake with turf installation. Turf installation guide is designed for new as well as experienced DIY’ers. Follow the guide on how to set up artificial turf for a perfect turf installation without the heavy price. This is the cheapest method to lay synthetic turf.

Turf Installation Companies

You do not have to contact many turf installation companies now because there is now an easier way to install turf. With this technique, you do not have to cut any seam because it uses interlocking tabs and it has pre-moulded edges which makes it easier to snap together. Also, you can order a roll and cut the exact length that you want. In no time, you can install a turf installation in your home or any outdoor area including parking lots.

Turf installation is not difficult if you know the right method. Now you can install synthetic grass at your home with ease. If you want to learn how to set up a turf, then you should read this turf installation guide. Here you will learn the details about the turf installation guide.

Prepare the Location

Before installing a turf, you must prepare the location. You have to clear the area where you want to install it. You can choose whether you want to use grass or turf. When you select turf, you can select whether you want natural grass or whether you want to use a chemical weed killer.

The next step is cutting the turf. You have to make two cuts on the turf parallel and six inches apart. The cut should be made in the middle of the turf, about one inch from the ends. After cutting, you can use the three-fourth inch nails to secure the turf to the ground.

For the next step, you have to prepare the turf for installation. You can create a well-ventilated area by using a plastic sheet and six to eight inches of the base material. Make sure that the base material is dry before you start setting the turf.

turf installation

Before starting the artificial grass installation process, you need to remove the existing sod. Then you have to remove the top layer of soil. You can use the crushed rock as the base material because it provides good traction.

Assemble the Turf

For the next stage, you have to assemble the turf. Start by putting down the base material, the turf itself and the seam tape. Make sure that the seams are connected well by using glue and seam tape. When the seams are well connected, you can now place the vertically placed fibres and create the imprints.

Then you have to put up the turf and the imprints. The best thing to do is to place the fibre side up and then run the seam tape over it. Then you need to attach the turf to the ground with the nails. You can use half-inch nails for longer areas and three and a half inches for smaller spaces. This will make sure that there is no glue seepage.

Final Steps

The last but not least, you need to finish your project by creating a walking surface for your customers or employees. To do this, you can either use an electric lawnmower or a handheld leaf blower. If you choose the first option, you should move the lawnmower along the turf and apply the cut-off leaves on the ground. If you choose the second option, you can use a leaf blower to do the job.

For the next step, you have to prepare the lawnmower for the final step. It means you should remove the chain and the spool of the grass cutter. In addition to that, you should also unplug the lawnmower from the electric socket. Now you can start to bend the lawnmower’s chain and turn it clockwise slowly. Then you need to secure the lawnmower to the ground using Brad’s nails.

To get the turf installation correctly, you need to do all of these steps correctly. There are times that you might find it difficult to do all of these steps at once. Therefore, you can do one part at a time. Keep in mind that if you do it correctly, you should be able to create a walking surface for ten to fifteen feet without any additional help. If you need more information on how to do it, you can go online and search for articles regarding lawn care.